Stratton Park House, Swindon, SN3 4HG 01793 497181 office@tts-uk.co.uk
UKRS Accredited · from £195+VAT Get a Quote
● Next available course: Heathrow, Tue 10 Nov — only 1 space left
Learn PAT Testing Tips · 7 min read

Do Laptops and Computers Need PAT Testing? IT Equipment Rules Explained

By the trainers at TTS Training Services — teaching PAT testing across the UK since 2008

Do laptops need pat testing?

Your laptop runs on a battery, so there is very little on it to test. The charger plugs into the wall, so the charger is the part that gets PAT tested.

Laptop, charger, tester

That process runs through all office IT.

Anything that plugs into a socket is required PAT test. Anything that runs on a battery gets looked over by eye. Desktop PCs, monitors and printers all plug into the wall, so all three are in into the pat testing list.

Let’s dive in….

Does a Laptop Charger Need PAT Testing?

Yes. A laptop charger require pat testing. The charger is a mains appliance of a laptop and this is why It goes on your register with its own asset ID. If it has a detachable kettle-style lead, that lead is tested, recorded and labelled separately.

Charger and its lead

The charger also takes more abuse than anything else on the desk. It gets pulled out by the cable, wound too tight, and rolled over by chair wheels. Most faults we found on office IT are in a lead or at a plug.

So the charger belongs into the pat testing bucket.

What Class Is a Laptop Charger for PAT Testing?

A typical laptop charger is Class 2. Class 2 means the appliance protects you with two layers of insulation instead of an earth. Class 1 means it protects you with an earth, so the earth connection has to be checked. A Class 2 item has no protective earth, so no earth test applies to it.

Check the brick before you test it. A square inside a square is the Class 2 mark.

Class 2 mark on a brick

Some power supplies carry an earth wire that is there to cut electrical interference, not to protect the user. The IET Code of Practice 5th Edition calls these Class 2 FE, for functional earth. That earth is not a safety earth, and it is not tested as one. Our guide to how Class II appliances are PAT tested sets out the sequence and the pass limits.

The rest of the desk is built differently.

Do Desktop Computers, Monitors and Printers Need PAT Testing?

Yes. Desktop PCs, monitors and printers all plug into the mains, so all three are tested. Most of them are Class 1, because they have a metal case and an earthed power supply inside.

The table below sets out what gets tested on each of the main items on an office desk.

Item Plugs into the mains? Usual class What gets tested
Laptop No, runs on a battery Not applicable Visual check only
Laptop charger Yes Class 2 The charger, and its lead separately
Desktop PC Yes Class 1 The PC, and its IEC lead separately
Monitor with an internal power supply Yes Class 1 The monitor, and its IEC lead
Monitor with an external brick Yes Class 2 The brick, not the monitor
Office printer Yes Class 1 The printer, and its IEC lead
Server or network switch Yes Class 1 Each power supply and each lead
Phone or tablet No, runs on a battery Not applicable The charger only

The pattern holds across all of it. Test the thing that plugs into the socket, and test each detachable lead on its own.

What plugs in, what does not

How Is IT Equipment Tested Without Damaging It?

Sensitive electronics are tested on gentler settings. The earth test on IT equipment uses a low current of 100 mA to 200 mA, because a 25 A current can burn out the tracks inside a circuit board. Insulation is tested at 250 V DC where an item has surge protection built in. The usual 500 V DC can destroy those protective parts.

Settings for IT equipment

Both are settings on the tester. Knowing when to change them is part of being trained.

Battery kit raises a different question.

Is Battery Powered Equipment Exempt from PAT Testing?

Battery powered equipment is not tested, because it has no mains connection to test. A laptop running on its battery, a cordless mouse and a tablet all sit outside the test itself.

They do not sit outside your duty. A cracked case or a swollen battery is a fault whether anything plugs in or not, and both are found by eye. So battery items still get a visual inspection, and the charger that feeds them still gets tested.

None of this means the laptop is ignored. The laptop gets eyes. The charger gets a tester.

How Often Should Office IT Equipment Be PAT Tested?

No interval is fixed in law. The duty holder sets it from a risk assessment, and office IT sits at the long end of the range, because it stays in one place and takes very little knocking about. Our guide to PAT testing frequency gives the starting intervals for office equipment and explains how to adjust them from your own results.

Chargers and leads are the exception inside IT. They move, so they wear, so they come round sooner than the box they feed.

One practical problem turns up the moment you start labelling IT kit.

Where Do You Put the PAT Testing Label on a Laptop Charger?

A charger has almost no flat surface, so the label goes in one of three places: the top of the plug, the cable just behind the plug, or the flat face of the brick.

Three label positions

Three rules keep the label useful once it is on:

  • Put it where somebody can read it without unplugging anything.
  • Keep it clear of the rating plate, the class mark and the vents.
  • Label a detachable lead on its own, because the lead and the charger are two records.

Wrap a cable label round the lead instead of sticking it flat, and it survives being coiled.

Label that survives coiling

A label stuck across the pins of a plug does not last a week.

What Else Should an Office Check, and Who Does the Checking?

Plenty of office equipment never reaches a tester. Spare monitors in a cupboard, battery keyboards and anything still boxed sit outside the test schedule… though a boxed item gets looked over when it comes out.

The checking itself splits in two. A trained member of staff can carry out visual inspections. Combined inspection and testing needs more than that: the knowledge, the right tester, and the ability to read what the tester reports.

Two halves of the job

HSE draws the line in those terms, describing visual inspection as work a sensible member of staff can undertake, and combined inspection and testing as work needing a greater level of knowledge and experience.

The person who holds that knowledge is the competent person. Competence is a description of what somebody knows and can do. It is not a job title and not a trade, and it comes from training.

An IT team can hold both halves in-house. Our page on PAT testing for IT support teams covers the wider job, and the one-day in-house PAT testing course is what puts a member of your team in that role, with no electrical experience needed to start.

Do laptops need PAT testing if they are never unplugged?

No. The laptop still runs through its charger, and the charger is the tested item.

Does a PAT test risk your data?

No. A PAT test checks electrical safety on a powered-down item. Normal practice is to back up first and test outside working hours.

Does new IT equipment need PAT testing straight away?

No. New equipment is supplied in a safe condition. It needs a visual check and a line in your register.

Keep reading

More from the PAT blog

Ready to put this into practice?

Our one-day hands-on PAT course turns reading into a UKRS-accredited certificate. Courses run every week at 21+ UK venues, live on Zoom, or at your premises.